Arwibon Q06Pro Electric Scooter Turn Signal Switch - Electric Scooter

Arwibon Q06Pro Electric Scooter Turn Signal Switch

Arwibon Q06Pro Electric Scooter Turn Signal Switch Turn Signal / Light / Horn Switch Replacement for Arwibon...
Vendor: Arwibon
Availability: In Stock
$35.00
$35.00
Please hurry! Only 1098 left in stock
Limited-Time Offers, End in: 151D 8H 23M 0S
Subtotal: $35.00

Free Shipping

Free Shipping

Free Returns

Learn More.

Built And Shipped Within 5 - 7 Bussiness Days

Arwibon Q06Pro Electric Scooter Turn Signal Switch - Electric Scooter

Arwibon Q06Pro Electric Scooter Turn Signal Switch

$35.00

Arwibon Q06Pro Electric Scooter Turn Signal Switch

$35.00

Arwibon Q06Pro Electric Scooter Turn Signal Switch

Turn Signal / Light / Horn Switch Replacement for Arwibon Q06Pro Electric Scooter

Compatible with Arwibon Q06Pro electric scooter. This switch assembly integrates the turn signal, headlight, and horn controls. It is a replacement part for damaged or malfunctioning handlebar switches.

Product Details

  • Model: Arwibon Q06Pro Electric Scooter
  • Part: Left Handlebar Switch Assembly
  • Function: Turn Signal / Headlight / Horn Control Replacement
  • Package Includes: 1 × Turn Signal Switch Assembly

Arwibon Q06Pro Three-in-One Switch Replacement Guide

(Turn Signal / Light / Horn Switch Replacement Guide)

⚠️ Safety Warning

  • Turn off the scooter completely before starting.
  • Disconnect the battery power before handling any wiring.
  • Q06Pro switch wiring contains multiple cables. Take photos of the original wiring position before removing connectors.
  • Do not pull wires directly. Always hold the connector when disconnecting.

🔧 Tools Required

  • Allen wrench set
  • Scissors or utility knife
  • Small flat screwdriver or pin removal tool
  • Electrical tape

Remove Old Switch

1. Remove Left Handlebar Components

  1. Remove the left rubber grip from the handlebar.
  2. Use an Allen wrench to loosen the brake lever fixing screw.
  3. Move the brake lever away from the switch area.
  4. Remove the fixing screw at the bottom of the old switch.
  5. Slide the old switch assembly off the handlebar.

2. Open the Deck Cover

  1. Remove the screws around the deck cover.
  2. Carefully lift the cover.

Note:
Do not pull the cover suddenly because there may be small wiring connected underneath.

3. Disconnect the Switch Wiring

  1. Follow the switch cable from the handlebar into the scooter body.
  2. Find the switch connectors inside the controller/battery compartment.
  3. Disconnect the related plugs one by one.

Before removing any connector:

  • Take a clear photo.
  • Record the wire color and connector position.

4. Remove the Old Cable

  1. Remove the spiral cable sleeve around the stem wiring.
  2. Cut the electrical tape carefully if the wires are wrapped together.
  3. Pull the old switch cable out from the scooter body.
  4. Remove the old switch completely.

Install New Switch

1. Install New Switch Assembly

  1. Insert the new Q06Pro switch onto the left handlebar.
  2. Adjust the position so the buttons are easy to operate.
  3. Tighten the fixing screw.
  4. Reinstall the brake lever and adjust the angle.
  5. Install the rubber grip back into position.

2. Route the New Cable

  1. Pass the new switch cable through the handlebar area.
  2. Guide the cable down through the stem.
  3. Pull the cable into the deck compartment.
  4. Leave enough cable length near the steering area.

Make sure:

  • The cable is not stretched.
  • The handlebar can turn freely.
  • The cable does not rub against sharp edges.

3. Connect the Wiring

  1. Match the new switch connectors with the original connectors.
  2. Connect each plug firmly.

If the connector requires pin installation:

  1. Check the original wiring photo.
  2. Match each wire color with the correct position.
  3. Insert each terminal into the connector housing.
  4. Make sure the terminal is locked firmly.

Important:
Wrong wire positions may cause the switch to malfunction or damage the electrical system.

4. Secure and Protect Wiring

  1. Arrange the switch cable together with the main stem wiring.
  2. Wrap the wiring with electrical tape.
  3. Reinstall the spiral cable sleeve.
  4. Make sure the wiring is protected and neat.

Final Function Test

Before closing the deck cover, test all functions:

Turn Signal Test

  • Left signal works normally.
  • Right signal works normally.

Headlight Test

  • Press the light button.
  • Confirm the headlight turns on.

Horn Test

  • Press the horn button.
  • Confirm the horn sounds.

After all functions work correctly:

  1. Organize the wiring inside the deck.
  2. Install the deck cover.
  3. Tighten all screws.

Q06Pro turn signal switch replacement completed.

Returns Policy

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. To start a return, you can contact us at support@arwibonscooter.com

If the return is caused by the consumer, consumer should be responsible for the shipping fee. The specific fee should be based on the express company you choose.

If due to our reasons, the goods received are damaged or not correct, and the consumer is not required to bear the shipping fee for this reason

If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. You can always contact us for any return question at support@arwibonscooter.com.

Damages and issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / non-returnable items

Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

European Union 14 day cooling off period,Notwithstanding the above, if the merchandise is being shipped into the European Union, you have the right to cancel or return your order within 14 days, for any reason and without a justification. As above, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

Refunds

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.

If more than 15 business days have passed since we’ve approved your return, please contact us at support@arwibonscooter.com.

Shipping

We proudly offer free US shipping via the following methods! Please note that it takes us an average of 3 to 5 business days to complete your order before we can ship it. Rest assured that we are doing everything we can to get your order to you as quickly as possible! Once your order is shipped, the estimated delivery time is 7 to 10 business days, depending on your country or region. Please consider that any holidays, natural disasters, or epidemics may affect delivery time

Shipping methods:

We have a US warehouse, and it usually takes 7-10 days to ship from a local warehouse in the United States

We have a warehouse in Poland, Europe. The shipping costs of various European countries are inconsistent and need to be determined according to the specific country. It usually takes 7-10 days to ship from a European warehouse

For pre-ordered/back-ordered items:

We ship available items immediately. Pre-ordered/back-ordered items ship when ready. If you receive part of your order first, don't worry; the rest is on its way.

Tracking your order:

Receive a confirmation email/text with tracking ID. Visit our Tracking Page to monitor your package's journey. Allow 1-3 days for tracking updates.

Wrong address disclaimer:

Buyers are responsible for correct shipping addresses. Contact us immediately if you notice an error.

Returns:

You cover return shipping costs. Refer to our Refund Policy for details on returns.

Lost/stolen packages:

We aren't liable for lost/stolen packages. Contact your carrier if your tracking shows delivery but you haven't received it. For assistance, email support@arwibonscooter.com

Related Products