Arwibon GT06 Scooter Tail Light

Arwibon GT06 Scooter Tail Light

This replacement tail light is made for the Arwibon GT06 electric scooter. The package includes two tail lights with wiring, as shown in the product photos.
Compatible Model: Arwibon GT06 only.
Not sure if this is the correct part? Send us photos of your original tail lights and wiring before ordering.

Before Installation

Prepare the appropriate tools for removing the mounting hardware and opening the battery compartment.
Turn off the scooter before starting. Check the original wire routing and connector position before removing the old tail lights.
We recommend watching the complete installation video before starting.

GT06 Tail Light Installation Guide

1. Prepare the Tail Lights – 00:00
Feed each tail light wire through the corresponding metal washer and nut.
Position the hardware as shown in the video so the tail light can be mounted correctly on the scooter.

2. Route the Wiring – 00:25
Feed the tail light wires through the original openings in the scooter frame.
Follow the routing shown in the video and carefully guide the wires inside the frame. Make sure the wires are not pinched, sharply bent, or left exposed where they could rub against other parts.

3. Seal the Wire Openings – 00:51
After the wiring is in position, apply sealant around the wire entry points as demonstrated in the video.
Cover the opening around the wire to help prevent water and dirt from entering the scooter through the routing hole.

4. Assemble the Connector – 01:28–02:35
The video shows how the individual tail light wires are inserted into the black connector housing.
Follow the wire positions and connector orientation shown in the video. Insert each terminal into its correct position and check that it is seated securely in the connector.
Do not guess the wire position or force a terminal into the connector.

5. Connect the Tail Light Wiring – 02:40
Open the battery compartment and locate the corresponding connection in the scooter wiring.
Connect the assembled tail light plug to the matching connector shown in the video. Arrange the wiring inside the compartment so it is not pinched when the compartment is closed.

How to Replace the Arwibon GT06 Scooter Tail Light

Check After Installation

Before riding:
Turn on the scooter and check that both tail lights work.
Check that both lights are securely mounted.
Make sure the wires are properly routed and not exposed to moving parts.
Check the sealed wire openings.
Make sure the connector is fully seated.
Check the wiring inside the battery compartment before closing it.
If either tail light does not work, turn off the scooter and recheck the connector and wire positions before riding.