- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
Free Shipping
You may request a return within 30 days of delivery, subject to our return policy. For returns due to a change of mind or other customer-related reasons, return shipping costs are the customer's responsibility. If your item arrives damaged, defective, or incorrect, please contact our support team for assistance. All returns must be approved before the item is shipped back. Please contact our customer service team to start a return request.For complete terms and conditions, please review our Refund Policy.
This replacement hardware kit is made for the Arwibon GT06 electric scooter and fits the handlebar/stem connection shown in the product photos.
The kit includes the bolt, nut, sleeves, washers, and related hardware shown in the package photo.
Compatible Model: Arwibon GT06 only.
Not sure if this is the correct part? Send us a photo of your GT06 handlebar/stem connection before ordering.
Prepare the correct Allen key and wrench. Turn off the scooter and place it on a stable surface.
Take a photo of the original assembly before disassembly. Note the position and direction of the sleeves, washers, and other hardware.
1. Remove the Original Bolt
Hold the nut on one side and loosen the bolt from the other. Remove the bolt and hardware carefully.
2. Remove the Original Sleeves and Hardware
Remove the sleeves, washers, and other components. Keep them in order so you can use their original positions as a reference.
3. Install the New Parts
Install the replacement parts in the same position and direction as the original components.
Do not force any part into place. If something does not fit correctly, check its position and direction again.
4. Reinstall and Tighten the Bolt
Insert the replacement bolt through the joint, install the washer and nut, and tighten the assembly securely.
Before riding:
Check that the bolt and nut are secure.
Check the handlebar/stem joint for looseness or side-to-side play.
Make sure the joint moves normally without binding.
Check that nearby cables and wires are not pinched or stretched.
Test the scooter at low speed in a safe area.
Do not ride if the handlebar/stem connection is loose or does not move normally.
Exactly the OEM replacement kit for worn‑out Arwibon GT06 handlebar parts. Every bushing, spring clip and fastener matches stock specifications. The included thread‑locking compound is a nice bonus. No more wobble on bumpy roads, handling feels solid again.
Complete hardware repair set for GT06 handlebar assembly. All metal components are precision machined to exact size. Take your time during disassembly to not lose small washers. After fitting, no more rattling or side‑to‑side play when riding. Great maintenance kit.
My scooter handlebar kept shaking while riding, old metal sleeves were worn out. This GT06 repair kit has every piece I needed. Installation was straightforward, using the supplied thread locker keeps bolts from vibrating loose. Now the handlebar stays tight and stable at all speeds.
This handlebar repair hardware kit works perfectly for my Arwibon GT06. All sleeves, springs, bolts and thread‑lock fluid are included. It completely fixed the annoying loose and wobbly handlebar issue. Metal parts feel heavy‑duty, same quality as original factory hardware.
Saved me from buying a whole new handlebar. This kit replaces all worn internal hardware. Fit is precise, no modification required. Once assembled properly, the handlebar holds firm. If you have handlebar shake or looseness on GT06, this is the right repair solution.
Thanks for subscribing!
This email has been registered!
| Product | SKU | Description | Collection | Availability | Product Type | Other Details |
|---|