Arwibon GT06 Electric Scooter Turn Signals

Arwibon GT06 Electric Scooter Turn Signals

Original Turn Signal Lights for Arwibon GT06 Electric Scooter

The Arwibon GT06 Electric Scooter Turn Signals are replacement indicator lights designed for the GT06 electric scooter.

These turn signals provide clear left and right direction indicators, helping improve visibility when changing direction during riding. They are designed to match the original scooter wiring system and are suitable for replacing damaged or broken turn signal lights.

Product Details

• Compatible with Arwibon GT06 Electric Scooter
• Includes 1 pair of left and right turn signals
• Replacement for damaged or non-working indicators
• Direct replacement with original mounting position
• Helps improve riding visibility and safety

GT06 Turn Signal Replacement Guide

(Turn Signal Light Installation Tutorial)

Tools Needed

• Allen wrench set
• Screwdriver
• Electrical tape (optional)

Removal Steps

1. Turn Off the Scooter

1. Turn off the scooter power completely.
2. Remove the key or disconnect power supply before working on the wiring.
3. Make sure the turn signal switch is not active.

2. Remove the Old Turn Signal

1. Locate the damaged turn signal on the front or rear side of the scooter.
2. Remove the screws or mounting bolts holding the signal light.
3. Carefully pull the turn signal away from the scooter body.
4. Follow the wire from the signal light to find the connector.

3. Disconnect the Wiring

1. Open the connector cover if needed.
2. Hold the connector body and unplug the old turn signal wire.
3. Do not pull directly on the wires to avoid damaging the cable.

Installation Steps

1. Install the New Turn Signal

1. Place the new GT06 turn signal into the original mounting position.
2. Align the screw holes.
3. Tighten the fixing screws to secure the signal light.
4. Make sure the light is firmly installed and does not move.

2. Connect the Wires

1. Connect the new turn signal plug to the original scooter connector.
2. Check that the connector is fully inserted.
3. Organize the extra wire length and keep it away from moving parts.

3. Test the Turn Signals

1. Turn on the scooter power.
2. Activate the left and right turn signal switches.
3. Check that both sides flash normally.
4. Confirm the wires and lights remain stable during operation.

After installation, the Arwibon GT06 Turn Signals restore the original indicator function and improve visibility for safer riding.