Arwibon GT06 Electric Scooter Brake Disc

Arwibon GT06 Electric Scooter Brake Disc

Original Brake Disc Replacement for Arwibon GT06 Electric Scooter

The Arwibon GT06 Electric Scooter Brake Disc is a replacement brake rotor designed for the GT06 electric scooter braking system.

The brake disc works together with the brake pads and caliper to provide reliable braking force. After long-term riding, the original brake disc may become worn, bent, or damaged due to impact or friction. Replacing the brake disc helps restore smooth braking performance and reduce abnormal brake noise.

Product Details

• Compatible with Arwibon GT06 Electric Scooter
• Includes brake disc ×1
• Original replacement brake component
• Designed for GT06 brake system
• Suitable for replacing worn or damaged brake rotors
• Helps maintain stable braking performance

GT06 Brake Disc Replacement Guide

(Brake Rotor Installation Tutorial)

Tools Needed

• Allen wrench set
• Screwdriver
• Clean cloth
• Thread locker (optional)

Removal Steps

1. Prepare the Scooter

1. Turn off the scooter power completely.
2. Place the scooter on a stable surface.
3. Lift the scooter or place it on a stand to make the wheel easier to access.

2. Remove the Brake Caliper

1. Locate the brake caliper near the brake disc.
2. Use an Allen wrench to remove the caliper fixing screws.
3. Move the caliper away from the brake disc.
4. Secure the caliper temporarily to avoid pulling on the brake cable or hydraulic line.

3. Remove the Old Brake Disc

1. Remove the wheel if the brake disc mounting screws cannot be accessed directly.
2. Locate the screws fixing the brake disc to the wheel hub.
3. Use the correct Allen wrench to loosen each screw.
4. Remove all fixing screws and take off the old brake disc.
5. Clean the mounting surface and remove dust or debris.

Installation Steps

1. Install the New Brake Disc

1. Place the new GT06 brake disc onto the wheel hub.
2. Align all mounting holes correctly.
3. Insert the fixing screws by hand first.
4. Tighten the screws evenly in a cross pattern to keep the disc flat.
5. Make sure all screws are securely tightened.

2. Reinstall the Brake Caliper

1. Install the wheel back onto the scooter if it was removed.
2. Place the brake caliper over the new brake disc.
3. Install the caliper fixing screws.
4. Adjust the caliper position so the brake disc stays centered between the brake pads.
5. Tighten the screws after confirming proper alignment.

3. Final Brake Test

1. Spin the wheel by hand and check that the brake disc rotates smoothly.
2. Make sure there is no continuous rubbing sound between the disc and brake pads.
3. Squeeze the brake lever several times to confirm normal brake response.
4. Perform a slow-speed test ride and check braking performance.

After replacement, the Arwibon GT06 Brake Disc helps restore proper brake operation and keeps your scooter ready for safe riding.