{"product_id":"arwibon-q30-scooter-key-lock-with-voltage-display","title":"Arwibon Q30 Scooter Key Lock with Voltage Display – Without Throttle","description":"\u003cp\u003eReplacement key ignition lock for the \u003cstrong\u003eArwibon Q30 electric scooter\u003c\/strong\u003e. This version includes the key switch and voltage display but \u003cstrong\u003edoes not include a throttle\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe assembly mounts directly on the handlebar and connects to the scooter's main wiring harness. Turning the key controls scooter power, while the built-in display shows the system voltage when the scooter is switched on.\u003c\/p\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the Arwibon Q30 scooter\u003c\/li\u003e\n\u003cli\u003eKey ignition ON\/OFF control\u003c\/li\u003e\n\u003cli\u003eBuilt-in voltage display\u003c\/li\u003e\n\u003cli\u003eHandlebar-mounted design\u003c\/li\u003e\n\u003cli\u003eWiring connector included\u003c\/li\u003e\n\u003cli\u003eSupplied with matching keys\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThrottle is not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\u003cp\u003ePlease compare the \u003cstrong\u003econnector, wire configuration, mounting position, and appearance\u003c\/strong\u003e with your original Q30 key lock before ordering.\u003c\/p\u003e\n\u003cp\u003eDifferent Q30 production versions may use different electrical connectors or handlebar components. This item should not be selected by scooter model name alone.\u003c\/p\u003e\n\u003ch3\u003eTools Required\u003c\/h3\u003e\n\u003cp\u003ePrepare the following tools before replacement:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllen key set\u003c\/li\u003e\n\u003cli\u003eScissors or utility knife\u003c\/li\u003e\n\u003cli\u003eBlack electrical insulation tape\u003c\/li\u003e\n\u003cli\u003eNylon cable ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse cutting tools carefully around the wiring insulation.\u003c\/p\u003e\n\u003ch2\u003eKey Lock Removal\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/MZwpOa_3JhU?si=aMvQyWqg0HbFglCP\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003e1. Open the Original Wiring Wrap\u003c\/h2\u003e\n\u003cp\u003eLocate the black spiral cable sleeve underneath the handlebar.\u003c\/p\u003e\n\u003cp\u003eUnwind the sleeve by hand and move it downward until the electrical connectors are exposed.\u003c\/p\u003e\n\u003cp\u003eCarefully remove the black electrical tape around the connector area. Keep the blade away from the cable insulation.\u003c\/p\u003e\n\u003cp\u003eSeparate the surrounding wires until the connector belonging to the key lock can be clearly identified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck:\u003c\/strong\u003e The key lock wire and its connector should be fully exposed and easy to access.\u003c\/p\u003e\n\u003ch2\u003e2. Disconnect the Key Lock Connector\u003c\/h2\u003e\n\u003cp\u003eHold both sides of the connector housing.\u003c\/p\u003e\n\u003cp\u003ePress the locking tab and pull the two connector halves straight apart.\u003c\/p\u003e\n\u003cp\u003eIf the key lock version has an additional auxiliary connector, disconnect it at the same time.\u003c\/p\u003e\n\u003cp\u003eDo not pull the connector apart by holding the wires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck:\u003c\/strong\u003e All wiring from the old key lock should now be separated from the scooter's main harness.\u003c\/p\u003e\n\u003ch2\u003e3. Remove the Grip, Brake Lever and Old Key Lock\u003c\/h2\u003e\n\u003cp\u003ePull and twist the outer rubber handlebar grip until it slides off the handlebar tube.\u003c\/p\u003e\n\u003cp\u003eUse the correct Allen key to loosen the brake lever clamp.\u003c\/p\u003e\n\u003cp\u003eSlide the brake lever outward and remove it from the handlebar.\u003c\/p\u003e\n\u003cp\u003eLoosen the clamp screw on the key ignition lock.\u003c\/p\u003e\n\u003cp\u003eSlide the complete old key lock assembly and its cable off the handlebar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck:\u003c\/strong\u003e The mounting section of the handlebar should now be clear and the old key lock completely removed.\u003c\/p\u003e\n\u003ch2\u003eKey Lock Installation\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/1esJc31CJ_4?si=m7i0CnukEwP4AgoM\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003e1. Install the New Key Lock\u003c\/h2\u003e\n\u003cp\u003eSlide the new key lock assembly onto the handlebar tube.\u003c\/p\u003e\n\u003cp\u003ePosition the wiring so it exits toward the lower side of the handlebar.\u003c\/p\u003e\n\u003cp\u003eDo not tighten the clamp completely yet.\u003c\/p\u003e\n\u003ch2\u003e2. Reinstall the Brake Lever and Grip\u003c\/h2\u003e\n\u003cp\u003eSlide the brake lever back onto the handlebar next to the key lock.\u003c\/p\u003e\n\u003cp\u003eReinstall the rubber grip at the end of the handlebar.\u003c\/p\u003e\n\u003cp\u003ePush the grip fully into position.\u003c\/p\u003e\n\u003cp\u003eAt this stage, the components should be arranged in the following order:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrip → Brake Lever → Key Lock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMake sure the components do not interfere with each other.\u003c\/p\u003e\n\u003ch2\u003e3. Adjust the Key Lock Position\u003c\/h2\u003e\n\u003cp\u003eRotate the key lock until the voltage display can be read comfortably from the riding position.\u003c\/p\u003e\n\u003cp\u003eTighten the key lock clamp screw with the Allen key.\u003c\/p\u003e\n\u003cp\u003eAdjust the brake lever angle to a comfortable operating position and tighten its clamp screw.\u003c\/p\u003e\n\u003cp\u003eCheck the key lock and brake lever by hand. Neither component should rotate or move on the handlebar.\u003c\/p\u003e\n\u003ch2\u003e4. Secure the Key Lock Wiring\u003c\/h2\u003e\n\u003cp\u003eRoute the key lock cable alongside the existing handlebar wiring.\u003c\/p\u003e\n\u003cp\u003eUse a nylon cable tie to hold the wires together.\u003c\/p\u003e\n\u003cp\u003eCut off the excess cable tie tail.\u003c\/p\u003e\n\u003cp\u003eDo not pull the cable tie so tight that it crushes or sharply bends the wires.\u003c\/p\u003e\n\u003ch2\u003eElectrical Connection\u003c\/h2\u003e\n\u003ch2\u003e1. Connect the New Key Lock\u003c\/h2\u003e\n\u003cp\u003eLocate the corresponding connector on the scooter's main wiring harness.\u003c\/p\u003e\n\u003cp\u003eCheck the plug orientation and alignment before connecting it.\u003c\/p\u003e\n\u003cp\u003ePush the two connectors straight together until the locking tab is fully engaged.\u003c\/p\u003e\n\u003cp\u003eDo not force the plug if the connector shape or pin arrangement does not match.\u003c\/p\u003e\n\u003ch2\u003e2. Test the Key Switch\u003c\/h2\u003e\n\u003cp\u003eInsert the key and turn it to the ON position.\u003c\/p\u003e\n\u003cp\u003eCheck that:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe voltage display turns on\u003c\/li\u003e\n\u003cli\u003eA voltage reading appears normally\u003c\/li\u003e\n\u003cli\u003eThe scooter display starts\u003c\/li\u003e\n\u003cli\u003eThe scooter electrical system powers up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTurn the key back to OFF after testing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck:\u003c\/strong\u003e The voltage display should switch off and the scooter should shut down when the key is turned off.\u003c\/p\u003e\n\u003ch2\u003eWiring Insulation and Cable Wrap\u003c\/h2\u003e\n\u003cp\u003eAfter the electrical test has passed, arrange the connectors and surrounding wires neatly.\u003c\/p\u003e\n\u003cp\u003eWrap the connector area with black electrical insulation tape for additional protection and to keep the plugs from moving against the surrounding wiring.\u003c\/p\u003e\n\u003cp\u003eReinstall the original black spiral protective sleeve around the cable group.\u003c\/p\u003e\n\u003cp\u003eContinue wrapping until the connector area is covered and the wiring sits neatly underneath the handlebar.\u003c\/p\u003e\n\u003cp\u003eDo not wrap the cable so tightly that steering movement is restricted.\u003c\/p\u003e\n\u003ch2\u003eFinal Installation Check\u003c\/h2\u003e\n\u003cp\u003eBefore riding the scooter, perform several final checks.\u003c\/p\u003e\n\u003ch3\u003eHandlebar Component Check\u003c\/h3\u003e\n\u003cp\u003eTry to rotate the:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRubber grip\u003c\/li\u003e\n\u003cli\u003eBrake lever\u003c\/li\u003e\n\u003cli\u003eKey lock assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe brake lever and key lock clamps should remain firmly in position.\u003c\/p\u003e\n\u003ch3\u003eSteering Test\u003c\/h3\u003e\n\u003cp\u003eTurn the handlebar fully to the left and then fully to the right.\u003c\/p\u003e\n\u003cp\u003eWatch the key lock cable and main wiring harness during the test.\u003c\/p\u003e\n\u003cp\u003eThe wiring should move naturally without:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePulling tight\u003c\/li\u003e\n\u003cli\u003ePinching\u003c\/li\u003e\n\u003cli\u003eSharp bending\u003c\/li\u003e\n\u003cli\u003ePulling on the electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower Test\u003c\/h3\u003e\n\u003cp\u003eTurn the key to ON again and check the voltage display and main scooter display.\u003c\/p\u003e\n\u003cp\u003eConfirm that the scooter powers on and off correctly with the key.\u003c\/p\u003e\n\u003cp\u003eDo not ride the scooter if the electrical system switches off unexpectedly, the display flickers, or the wiring becomes tight during steering.\u003c\/p\u003e","brand":"Arwibon","offers":[{"title":"Default Title","offer_id":53526626599221,"sku":null,"price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/4893\/0357\/files\/GT06_b950e993-e333-449c-b7f0-453fbcc16def.jpg?v=1789021733","url":"https:\/\/arwibon.us\/products\/arwibon-q30-scooter-key-lock-with-voltage-display","provider":"Arwibon","version":"1.0","type":"link"}