{"product_id":"arwibon-q13pro-scooter-front-and-rear-wheels-controller","title":"Arwibon Q13Pro scooter Front and rear wheels controller","description":"\u003cdiv\u003e\n\u003ch2\u003eArwibon Q13Pro Electric Scooter Front and Rear Wheels Controller\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOriginal Dual Motor Controller Set (Controller A + Controller B) for Arwibon Q13Pro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003ca href=\"https:\/\/arwibon.us\/\" title=\"arwibon scooter\"\u003eArwibon\u003c\/a\u003e Q13Pro Front and Rear Wheels Controller Kit\u003c\/strong\u003e includes two original controllers for the Q13Pro dual motor system.\u003c\/p\u003e\n\u003cp\u003eThe controllers manage the power output from the battery to the front and rear motors, controlling acceleration, motor operation, and braking response.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eController A:\u003c\/strong\u003e Rear wheel motor controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController B:\u003c\/strong\u003e Front wheel motor controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e⚠️ \u003cstrong\u003eImportant:\u003c\/strong\u003e The front and rear controllers are different. Please confirm the controller position before installation. Incorrect connection may cause the motor to operate abnormally.\u003c\/p\u003e\n\u003ch3\u003eProduct Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal replacement controller set for Arwibon Q13Pro scooter\u003c\/li\u003e\n\u003cli\u003eIncludes both front and rear motor controllers\u003c\/li\u003e\n\u003cli\u003eSupports Q13Pro dual motor drive system\u003c\/li\u003e\n\u003cli\u003eRestores normal acceleration and motor control\u003c\/li\u003e\n\u003cli\u003eDirect replacement for damaged controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eArwibon Q13Pro Dual Controller Replacement Guide\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e(Front \u0026amp; Rear Controller Removal and Installation Guide)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e⚠️ Safety Warning Before Repair\u003c\/h3\u003e\n\u003cp\u003eBefore replacing the controller, please make sure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe scooter is completely powered off.\u003c\/li\u003e\n\u003cli\u003eThe charger is disconnected.\u003c\/li\u003e\n\u003cli\u003eThe battery power connector must be disconnected before touching any controller wires.\u003c\/li\u003e\n\u003cli\u003eDo not connect or remove motor wires while the controller is powered.\u003c\/li\u003e\n\u003cli\u003eKeep the front and rear motor cables separated to avoid incorrect installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRequired Tools\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllen wrench set\u003c\/li\u003e\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\u003cli\u003eCable ties\u003c\/li\u003e\n\u003cli\u003eElectrical tape (optional)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/MyS3U2HkfF8?si=qN6mfb5nQ7rF9KTG\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tQPFG5BGftA?si=GhxqiPtXo3GaGgQK\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/IsWA9Z3VU5I?si=7rprRjpCFu7jCU7e\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eStep 1: Remove the Deck Cover\u003c\/h2\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003ePlace the scooter on a flat and stable surface.\u003c\/li\u003e\n\u003cli\u003eTurn off the scooter and remove the key if equipped.\u003c\/li\u003e\n\u003cli\u003eUse an Allen wrench to remove all screws around the deck cover.\u003c\/li\u003e\n\u003cli\u003eCarefully lift the deck cover.\u003c\/li\u003e\n\u003cli\u003eCheck the internal wiring layout before disconnecting anything. It is recommended to take a photo of the original wiring position for reference during installation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eStep 2: Disconnect the Main Battery Power\u003c\/h2\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003eLocate the main power connectors connected to the controllers.\u003c\/li\u003e\n\u003cli\u003eHold the plastic connector firmly with your hand.\u003c\/li\u003e\n\u003cli\u003ePull the connector apart slowly.\u003c\/li\u003e\n\u003cli\u003eConfirm that the controllers are no longer connected to the battery power.\u003c\/li\u003e\n\u003cli\u003eWait a few seconds before continuing the replacement process.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e⚠️ Do not pull the wires directly. Always hold the connector body to avoid damaging the cable.\u003c\/p\u003e\n\u003ch2\u003eStep 3: Remove the Rear Wheel Controller (Controller A)\u003c\/h2\u003e\n\u003cp\u003eThe rear controller controls the rear motor.\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cp\u003eFind the controller connected to the rear motor cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLocate the three thick motor power wires.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDisconnect the three motor phase wires:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYellow wire\u003c\/li\u003e\n\u003cli\u003eGreen wire\u003c\/li\u003e\n\u003cli\u003eBlue wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFind the rear motor hall sensor connector.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePress the connector lock and pull it out carefully.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDisconnect the remaining signal cables connected to the controller.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemove any cable ties holding the controller wires.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemove the fixing screws or mounting parts of the controller.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTake out the old rear controller.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eStep 4: Remove the Front Wheel Controller (Controller B)\u003c\/h2\u003e\n\u003cp\u003eThe front controller controls the front motor.\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cp\u003eLocate the second controller inside the deck.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that it is connected to the front motor cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDisconnect the three front motor phase wires:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYellow wire\u003c\/li\u003e\n\u003cli\u003eGreen wire\u003c\/li\u003e\n\u003cli\u003eBlue wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDisconnect the front motor hall sensor plug.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDisconnect other control signal connectors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemove cable ties around the wiring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemove the fixing screws.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTake out the old front controller.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eStep 5: Install the New Front Controller (Controller B)\u003c\/h2\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003ePlace the new front controller into the original mounting position.\u003c\/li\u003e\n\u003cli\u003eSecure the controller with the original screws.\u003c\/li\u003e\n\u003cli\u003eConnect the front motor hall sensor plug.\u003c\/li\u003e\n\u003cli\u003eConnect all front controller signal cables.\u003c\/li\u003e\n\u003cli\u003eConnect the three motor phase wires according to the colors:\n\u003cul\u003e\n\u003cli\u003eYellow → Yellow\u003c\/li\u003e\n\u003cli\u003eGreen → Green\u003c\/li\u003e\n\u003cli\u003eBlue → Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePush each connector firmly until it is fully connected.\u003c\/li\u003e\n\u003cli\u003eCheck that no metal part of the connector is exposed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eStep 6: Install the New Rear Controller (Controller A)\u003c\/h2\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003ePlace the new rear controller into the original position.\u003c\/li\u003e\n\u003cli\u003eTighten the controller fixing screws.\u003c\/li\u003e\n\u003cli\u003eConnect the rear motor hall sensor plug.\u003c\/li\u003e\n\u003cli\u003eConnect the rear motor signal cables.\u003c\/li\u003e\n\u003cli\u003eConnect the three rear motor phase wires:\n\u003cul\u003e\n\u003cli\u003eYellow → Yellow\u003c\/li\u003e\n\u003cli\u003eGreen → Green\u003c\/li\u003e\n\u003cli\u003eBlue → Blue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCheck every connector again to make sure there is no loose connection.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eStep 7: Connect Battery Power\u003c\/h2\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cp\u003eCheck all controller connections before powering on.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMake sure:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront controller connects to the front motor.\u003c\/li\u003e\n\u003cli\u003eRear controller connects to the rear motor.\u003c\/li\u003e\n\u003cli\u003eAll signal plugs are connected.\u003c\/li\u003e\n\u003cli\u003eNo wires are pinched or damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the battery power connectors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eArrange the wires inside the deck carefully.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep cables away from sharp edges and screw holes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eStep 8: Testing Before Closing the Deck\u003c\/h2\u003e\n\u003cp\u003eDo not install the deck cover immediately. Test the scooter first.\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003eTurn on the scooter.\u003c\/li\u003e\n\u003cli\u003eCheck whether the display works normally.\u003c\/li\u003e\n\u003cli\u003eSlowly press the throttle.\u003c\/li\u003e\n\u003cli\u003eCheck whether the front and rear motors rotate smoothly.\u003c\/li\u003e\n\u003cli\u003eTest acceleration response.\u003c\/li\u003e\n\u003cli\u003ePull the brake lever and confirm the motor stops immediately.\u003c\/li\u003e\n\u003cli\u003eListen for abnormal noise from the motors.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf everything works normally:\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003eTurn off the scooter.\u003c\/li\u003e\n\u003cli\u003eArrange all wires neatly.\u003c\/li\u003e\n\u003cli\u003eInstall the deck cover.\u003c\/li\u003e\n\u003cli\u003eTighten all screws evenly.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe replacement of the \u003cstrong\u003eArwibon Q13Pro front and rear dual motor controllers\u003c\/strong\u003e is now complete. The scooter should return to normal dual motor performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Arwibon","offers":[{"title":"Default Title","offer_id":51291124924725,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/4893\/0357\/files\/40D4C9B3-804D-431F-9F9D-7579E28B4141.jpg?v=1762074740","url":"https:\/\/arwibon.us\/products\/arwibon-q13pro-scooter-front-and-rear-wheels-controller","provider":"Arwibon","version":"1.0","type":"link"}