{"product_id":"arwibon-gt08-front-suspension-axle-spacer","title":"Arwibon GT08 Front Suspension Axle + Spacer","description":"\u003cp\u003eReplacement \u003cstrong\u003efront suspension axle and spacer\u003c\/strong\u003e for the Arwibon GT08 electric scooter.\u003c\/p\u003e\n\u003cp\u003eThis part is installed at the front suspension pivot area and connects the suspension arm to the scooter frame. The axle passes through the mounting point, while the spacer keeps the suspension assembly correctly positioned inside the frame.\u003c\/p\u003e\n\u003ch3\u003eProduct Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront suspension axle\u003c\/li\u003e\n\u003cli\u003eMatching spacer\u003c\/li\u003e\n\u003cli\u003eReplacement hardware for the corresponding GT08 suspension position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility Notice\u003c\/h3\u003e\n\u003cp\u003ePlease compare the \u003cstrong\u003eaxle diameter, axle length, spacer size, mounting position, and original part appearance\u003c\/strong\u003e before ordering.\u003c\/p\u003e\n\u003cp\u003eDifferent scooter versions may use different suspension hardware. Do not select this part only by scooter model name.\u003c\/p\u003e\n\u003ch3\u003eTools Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllen key set\u003c\/li\u003e\n\u003cli\u003eSocket or wrench set\u003c\/li\u003e\n\u003cli\u003eRubber mallet if needed\u003c\/li\u003e\n\u003cli\u003eClean cloth\u003c\/li\u003e\n\u003cli\u003eSuitable grease for the axle surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRemoval\u003c\/h2\u003e\n\u003ch3\u003e1. Support the Front End\u003c\/h3\u003e\n\u003cp\u003ePlace the scooter on a stable repair stand.\u003c\/p\u003e\n\u003cp\u003eMake sure the front wheel and suspension are supported before removing the axle.\u003c\/p\u003e\n\u003cp\u003eDo not allow the suspension arm to drop suddenly after the fastener is removed.\u003c\/p\u003e\n\u003ch3\u003e2. Remove the Axle Fastener\u003c\/h3\u003e\n\u003cp\u003eLocate the front suspension pivot axle shown in the product image.\u003c\/p\u003e\n\u003cp\u003eUse the correct Allen key or wrench to loosen the axle bolt or retaining hardware.\u003c\/p\u003e\n\u003cp\u003eHold the opposite side if the axle rotates during removal.\u003c\/p\u003e\n\u003ch3\u003e3. Pull Out the Old Axle\u003c\/h3\u003e\n\u003cp\u003eRemove the axle slowly from the suspension mounting point.\u003c\/p\u003e\n\u003cp\u003eSupport the suspension arm while pulling the axle out.\u003c\/p\u003e\n\u003cp\u003eRemove the old spacer at the same time and note its original position and direction.\u003c\/p\u003e\n\u003ch3\u003e4. Inspect the Mounting Area\u003c\/h3\u003e\n\u003cp\u003eCheck the suspension mounting holes and surrounding parts for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWear\u003c\/li\u003e\n\u003cli\u003eDamage\u003c\/li\u003e\n\u003cli\u003eDeformation\u003c\/li\u003e\n\u003cli\u003eDirt or rust\u003c\/li\u003e\n\u003cli\u003eDamaged bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the axle hole before installing the new part.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003ch3\u003e1. Position the Spacer\u003c\/h3\u003e\n\u003cp\u003ePlace the new spacer in the same position as the original part.\u003c\/p\u003e\n\u003cp\u003eMake sure it sits correctly between the suspension arm and frame.\u003c\/p\u003e\n\u003cp\u003eThe holes must line up before inserting the axle.\u003c\/p\u003e\n\u003ch3\u003e2. Install the New Axle\u003c\/h3\u003e\n\u003cp\u003eApply a light coat of suitable grease to the axle surface if required.\u003c\/p\u003e\n\u003cp\u003eAlign the suspension arm, spacer, and frame mounting holes.\u003c\/p\u003e\n\u003cp\u003ePush the new axle through all mounting points.\u003c\/p\u003e\n\u003cp\u003eDo not hammer the axle in forcefully if the holes are not aligned.\u003c\/p\u003e\n\u003ch3\u003e3. Tighten the Fastener\u003c\/h3\u003e\n\u003cp\u003eReinstall the retaining bolt, nut, or original locking hardware.\u003c\/p\u003e\n\u003cp\u003eTighten it securely with the correct tool.\u003c\/p\u003e\n\u003cp\u003eThe suspension arm should remain firmly mounted but still move normally through its suspension travel.\u003c\/p\u003e\n\u003ch3\u003eFinal Check\u003c\/h3\u003e\n\u003cp\u003eAfter installation, check that:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe axle is fully seated\u003c\/li\u003e\n\u003cli\u003eThe spacer is centered correctly\u003c\/li\u003e\n\u003cli\u003eNo side-to-side looseness is present\u003c\/li\u003e\n\u003cli\u003eThe suspension arm moves freely\u003c\/li\u003e\n\u003cli\u003eNo unusual metal contact or binding occurs\u003c\/li\u003e\n\u003cli\u003eThe front suspension returns normally after compression\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore riding, push down on the front suspension several times and inspect the axle area again.\u003c\/p\u003e","brand":"Arwibon","offers":[{"title":"Default Title","offer_id":53526626107701,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/4893\/0357\/files\/4f31cce3-960b-4cb9-9ea9-854fb733f04d.png?v=1789025094","url":"https:\/\/arwibon.us\/products\/arwibon-gt08-front-suspension-axle-spacer","provider":"Arwibon","version":"1.0","type":"link"}